Skip to content

rig.solved

Striped Bass rig for Jetty & Pier

For Striped Bass in Jetty & Pier, the cheapest build in our catalog that clears every engine check is a 5/0 circle hook on 20 lb copolymer to a 30 lb fluoro leader, fished with 1 oz bullet sinker, natural bait on a 10 ft MH surf rod and a spinning reel. About $304 at street prices.

Striped BassJetty & Pier0 errors, 0 warnings6 parts~$304
striped-bass@jetty-pier.rig
hook
5/0 circleEagle Claw Lazer Sharp Circle Sea
mainline
20 lb copolymerStren Original Copolymer
leader
30 lb fluoroYo-Zuri HD Carbon Fluorocarbon Leader
weight
1 oz bulletBullet Weights Lead Bullet Worm Weights
bait
natural baitlive or cut, sized to the hook
rod
10 ft MH surfPenn Prevail III Surf Rod
reel
spinning 5000Penn Battle IV Spinning Reel, 25 lb drag
knots
Palomar Knotfluoro to hook at 95% retained strength
Open in the Rig Studioevery slot loaded, editable
viewport · 8–35 ft · current 0.60

The studio's own simulation, driven by the same numbers as the checks below.

Every check, with the numbers

15 checks from the compatibility engine. Each line shows what this build measures and what it is measured against; the verdict comes from the same engine call the studio makes.

problems · trace15/15 pass
Compatibility checks for the Striped Bass rig in Jetty & Pier
CheckThis buildAgainst
passspecies.waterJetty & Pier: saltStriped Bass: salt / brackish / fresh
passrod.reel.seatspinning reelsurf rod
passmainline.species20 lb20–50 lb window (warns over 75)
passmainline.rod0.44 mm ≈ 19 lb monorod rated 15–40 lb (under 9 warns)
passrod.powerMH rod, rated to 40 lb35 lb fish (warns over 70 lb, fails over 100 lb)
passreel.capacity~361 yd of 20 lb copolymer300 yd for a 35 lb fish
passreel.drag25 lb max drag12 lb floor
passhook.size5/03/0 to 8/0
passhook.strength70 lb before it opens42 lb (1.2 × 35 lb fish)
passsalt.corrosion3 metal parts checkedsalt water: salt-rated or stainless
passleader.abrasion30 lb fluoroabrasion 0.70: leader from 0.60
passleader.ratio30 lb on 20 lb0.75× to 2× mainline (15–40 lb)
passweight.bore1.6 mm bore0.64 mm (0.49 mm line + 0.15)
passcast.weight1 oz on the linerod rated 1–4 oz
passweight.current1 oz0.9 oz minimum at current 0.60

Notes the engine attaches

  • Circle hook: do not set the hookhook

    Reel down until the line comes tight and let the rod load. A circle hook slides to the jaw hinge and rotates closed on its own. A conventional swing pulls it straight back out of the mouth: the technique change is mandatory, not stylistic. Read the guide.

  • No sun protection selectedapparel

    Jetty & Pier runs up to 92°F and reflected UV off water roughly doubles your exposure. A UPF hoodie and polarized glasses are the two highest-value pieces of clothing in fishing, and the glasses also let you see structure.

Why these numbers

  • Jetty & Pier runs 8–35 ft and Striped Bass feeds at a depth bias of 0.50 (0 is the surface, 1 is hard bottom), so the engine puts the fish near 22 ft.
  • Current rates 0.60, which the engine turns into roughly 1.8 oz to hold bottom and warns under half that. This build carries 1 oz.
  • The water is stained and Striped Bass rates 0.45 for line shyness and 0.70 for abrasion. That is why the business end is 30 lb fluoro: it takes the teeth, gill plates and structure so the mainline does not.
  • Typical fish run 5–35 lb. That sets the 12 lb drag floor (this reel makes 25 lb) and the hook strength floor of 42 lb (this hook is rated 70 lb).
  • Jetty & Pier is salt water. Every hook, reel, rod and swivel in the build is checked for a salt rating, and all of them pass.

Parts list

bill-of-materials6 lines
Every part in the Striped Bass rig for Jetty & Pier with its chosen option and approximate price
StagePartOptionApprox.
hook.terminalEagle Claw Lazer Sharp Circle Sea5/0~$5
weight.terminalBullet Weights Lead Bullet Worm Weights1 oz~$5
leader.connectionYo-Zuri HD Carbon Fluorocarbon Leader30 lb~$14
mainline.connectionStren Original Copolymer20 lb~$10
reel.platformPenn Battle IV Spinning Reel–~$130
rod.platformPenn Prevail III Surf Rod–~$140
Street-price estimate, not a live price~$304
weight.terminalbudget

Bullet Weights Lead Bullet Worm Weights

The Texas rig weight. Slides on the line ahead of the hook, noses through cover, and costs almost nothing when you break one off.

~$5Purchase link unverified

No exact product destination has been verified for this item.

mainline.connectionvalue

Stren Original Copolymer

A blend that splits the difference: less stretch than straight mono, more manageable than fluoro, and cheap enough to respool often.

~$10Purchase link unverified

No exact product destination has been verified for this item.

reel.platformvalue

Penn Battle IV Spinning Reel

A full-metal, sealed-drag saltwater workhorse. Heavier than a freshwater reel because it is built to be dunked, sanded, and used again tomorrow.

~$130Amazon — Battle IV / size 5000

Verified destination: Battle IV / size 5000 (2026-10-20). Other sizes or packs are not verified by this link.

Scope: the solver builds a tied hook-and-line rig from the parts in our catalog, cheapest first among builds with the fewest problems. Hard baits with their own trebles, flies, and field gear (waders, clothing, boats) are left to you. A different catalog would give a different answer, and the studio will check whatever you swap in.

Change one variable

Striped Bass, other water

Jetty & Pier, other fish

frequently asked

05
What size hook for Striped Bass in Jetty & Pier?

5/0, on a Eagle Claw Lazer Sharp Circle Sea (circle). The working window for Striped Bass is 3/0 to 8/0; the size is matched to the bait, so a bigger bait moves you toward 8/0.

What pound test line for Striped Bass?

20 lb copolymer in this build, inside the 20–50 lb working window. It measures 0.44 mm, the diameter of about 19 lb mono, and rod line ratings are printed for mono. This rod is rated 15–40 lb.

How much weight for Striped Bass in Jetty & Pier?

At a current rating of 0.60 the engine works out roughly 1.8 oz to hold bottom and warns under 0.9 oz. This build runs 1 oz of bullet, inside the rod's 1–4 oz casting rating. Cast across heavy flow and you will want more.

Do I need a leader for Striped Bass here?

Yes. Striped Bass rates 0.70 for abrasion and 0.45 for line shyness, with a leader window of 30–60 lb. This build uses 30 lb fluoro.

What does this Striped Bass setup cost?

About $304 for the 6 parts listed, using street-price estimates kept in our catalog. That is not a live Amazon price, and it covers the tackle only: bait, waders, clothing and boats are not included.