Open Rig Studio

venue.profile · salt water

Jetty and pier fishing setup

Barnacle-covered rock in moving water. The single most abrasive environment in this list; assume the structure is trying to cut you off. We solve 6 of the 7 fish anglers actually target in this water: hooks from 1/0 to 5/0, 10–20 lb mainline, $211–$306 in tackle. No catalog build for Tarpon clears every engine error here, so that row stays in the table with its errors. Below is every check the water itself drives, with the engine's numbers.

Jetty & Pier8–35 ftcurrent 0.60stained6/7 rigs clean
jetty-pier.venue
water
salt
clarity
stained
depth
8–35 ft
current
0.60 of 1.00
air temp
45–92°F
structure
rock, reef, open
access
pier, bank
wading
no
hold
~1.8 oz sinkerengine warns under 0.9 oz
viewport · speckled trout at 23 ft

The cheapest clean rig here, speckled trout at ~$211, in the studio's own simulation.

Where this water sits

Jetty & Pier against the other 12 venues in our data, on the two axes the engine reads most: current and depth.

current · 0–1
Farm Pond: 0.00 Weedy Lake: 0.05 Clear Reservoir: 0.10 Mountain Creek: 0.55 River Run: 0.70 Big River Channel: 0.85 Hardwater / Ice: 0.00 Open Surf Beach: 0.75 Inshore Flat: 0.35 Mangrove Estuary: 0.40 Nearshore Reef: 0.50 Offshore Bluewater: 0.65 0.60stillsinker must hold ≥ 0.50
Current 0.60. Under 0.10 the engine calls water still; from 0.50 it wants a sinker that holds bottom. Grey ticks are the other venues.
depth · ft, log scale
no float past 30 ft Farm Pond: 2–12 ft Weedy Lake: 3–25 ft Clear Reservoir: 8–60 ft Mountain Creek: 1–5 ft River Run: 3–18 ft Big River Channel: 15–70 ft Hardwater / Ice: 4–40 ft Open Surf Beach: 3–20 ft Inshore Flat: 1–6 ft Mangrove Estuary: 2–15 ft Jetty & Pier: 8–35 ft Nearshore Reef: 25–120 ft Offshore Bluewater: 60–600 ft Striped Bass: 22 ft Redfish: 31 ft Speckled Trout: 23 ft Snook: 24 ft Flounder: 35 ft Tarpon: 19 ft King Mackerel: 19 ft 131030100300600
Jetty & Pier spans 8–35 ft (highlighted row); dots are where the engine places each fish. Shaded: past 30 ft, where it errors on a float rig.

What this water changes in a rig

Every check below is one the engine runs on any build you put in Jetty & Pier, with the threshold it uses. Nothing here is written for this venue by hand: change the venue's numbers and the page rewrites itself.

  • weight.currentAbout 1.8 oz to hold bottom

    Current rates 0.60 on our 0–1 scale. The engine's working figure is 3 oz of sinker per unit of current, so roughly 1.8 oz keeps a bait on the bottom, and it warns under 0.9 oz. Casting across the flow takes more. Float rigs are exempt: they ride the current instead of fighting it. The sinker rigs we solve here carry 1 oz.

  • depth.targetFish sit 19–35 ft down

    Jetty & Pier spans 8–35 ft. The engine places each fish by its depth bias (0 is the surface, 1 is hard bottom): Tarpon at 19 ft, King Mackerel at 19 ft, Striped Bass at 22 ft, Speckled Trout at 23 ft, Snook at 24 ft, Redfish at 31 ft, Flounder at 35 ft. A lure that runs more than 2 ft above the fish gets flagged.

  • float.depthA float works for 5 of 7 fish

    The engine errors on a float rig with the fish past 30 ft and warns on one for a fish that feeds at a depth bias of 0.90 or more. Too deep here: Redfish and Flounder. Bottom feeders here: Flounder. 1 of the 6 solved rigs here uses one.

  • leader.visibilityStained: visibility checks stay quiet

    The engine's braid-visibility warning only fires in gin-clear water and its hi-vis note only in muddy water. Jetty & Pier is neither, so leaders here are about teeth and abrasion, not about being seen.

  • leader.abrasionSome fish here need wire

    Structure here is rock, reef and open. The engine reads abrasion from the fish (teeth, gill plates, the cover it dives into), not from the venue: a leader from 0.60, wire only from 0.95. Leader required: Striped Bass (0.70), Redfish (0.80), Snook (0.90), Flounder (0.60) and Tarpon (0.90). Wire only: King Mackerel (1.00).

  • salt.ratingEvery metal part must be salt-rated

    Jetty & Pier is salt water. The engine checks the hook, reel, rod and swivel: an unrated reel is an error, because unsealed bearings seize within a season; an unrated hook or rod and any brass swivel are warnings. Every solved rig here passes. Rinse in fresh water the same day either way.

  • wadersNot a wading venue

    Access is pier and bank. Put waders in a build here and the engine notes they are not doing anything.

  • apparel.sunUp to 92°F: sun is a gear item

    From 80°F the engine notes sun protection when the build has none. Open water gives you no shade, and the surface bounces some UV back up under a hat brim. A UPF hood covers both, and polarized glasses also let you see structure.

Every rig we solve here

One rig per fish: the cheapest catalog build with the fewest engine problems. Each row links to the full page with the check trace, the parts list and an "open in studio" link.

rigs@jetty-pier6 clean · 7 total
FishDepthHookMainlineLeaderWeight / floatRodApprox.Engine
Striped Bass22 ft5/0 circle20 lb copolymer30 lb fluoro1 oz bullet10 ft MH~$304clean
Redfish31 ft4/0 circle17 lb copolymer20 lb fluoro1 oz bullet10 ft MH~$304clean
Speckled Trout23 ft1/0 circle10 lb monononepencil float6.6 ft M~$211clean
Snook24 ft5/0 circle20 lb copolymer30 lb fluoro1 oz bullet10 ft MH~$304clean
Flounder35 ft3/0 circle12 lb mono20 lb fluoro1 oz bullet10 ft MH~$303clean
Tarpon19 ft7/0 circle50 lb braid60 lb fluoro1 oz bullet10 ft MH~$3761 error
King Mackerel19 ft5/0 circle20 lb copolymer40 lb wire1 oz bullet10 ft MH~$306clean

Prices are street-price estimates for the tackle only, not live Amazon prices. Rigs flagged with a warning or error say why on their own page; we print what the catalog cannot clear rather than hide it.

frequently asked

05
What fish can you catch jetty and pier fishing?

We publish a solved rig here for Striped Bass, Redfish, Speckled Trout, Snook, Flounder and King Mackerel. No catalog build for Tarpon clears every engine error here, so that row stays in the table with its errors. Those are the fish whose habitat in our species data includes Jetty & Pier; matching water type alone is not enough to make the list.

How much weight do you need for jetty and pier fishing?

Roughly 1.8 oz to hold bottom. Current rates 0.60 on our 0–1 scale and the engine works 3 oz per unit of current, warning under 0.9 oz. Our solved sinker rigs here carry 1 oz. Float rigs skip the check because they drift with the flow.

What pound test line for jetty and pier fishing?

10–20 lb across the rigs we solve here, set by the fish rather than the water: 20 lb copolymer for Striped Bass, 17 lb copolymer for Redfish, 10 lb mono for Speckled Trout, 20 lb copolymer for Snook, 12 lb mono for Flounder, 20 lb copolymer for King Mackerel. Rod line ratings are printed for mono, so braid is compared by diameter.

Do you need a leader in Jetty & Pier?

5 of the 6 solved rigs here run one (4 fluorocarbon, 1 wire). The water is stained. Structure here is rock, reef and open. The engine reads abrasion from the fish (teeth, gill plates, the cover it dives into), not from the venue: a leader from 0.60, wire only from 0.95. Leader required: Striped Bass (0.70), Redfish (0.80), Snook (0.90), Flounder (0.60) and Tarpon (0.90). Wire only: King Mackerel (1.00).

Jetty and pier fishing: can you wade, or do you need a boat?

Access is pier and bank. You can fish it from shore, but not by wading.

Other water

more salt water

fresh and other

related
All venues comparedAll solved rigs: species by venueFishing weights and sinkersSlip float riggingBraid vs mono vs fluoroOpen the studio with Jetty & Pier set