Skip to content

rig.solved

Redfish rig for Inshore Flat

For Redfish in Inshore Flat, the cheapest build in our catalog that clears every engine check is a 4/0 circle hook on 17 lb copolymer to a 20 lb fluoro leader, fished with a bubble float, Gulp! Shrimp on a 6.6 ft M spinning rod and a spinning reel. About $218 at street prices.

RedfishInshore Flat0 errors, 0 warnings7 parts~$218
redfish@inshore-flat.rig
hook
4/0 circleEagle Claw Lazer Sharp Circle Sea
mainline
17 lb copolymerStren Original Copolymer
leader
20 lb fluoroYo-Zuri HD Carbon Fluorocarbon Leader
weight
nonethe float carries the bait
float
bubblePlastilite Water-Fill Casting Bubble
bait
Gulp! Shrimpscent dispersal, minimal built-in action
rod
6.6 ft M spinningUgly Stik GX2 Spinning Rod
reel
spinning 5000Penn Battle IV Spinning Reel, 25 lb drag
knots
Palomar Knotfluoro to hook at 95% retained strength
Open in the Rig Studioevery slot loaded, editable
viewport · 1–6 ft · current 0.35

The studio's own simulation, driven by the same numbers as the checks below.

Every check, with the numbers

18 checks from the compatibility engine. Each line shows what this build measures and what it is measured against; the verdict comes from the same engine call the studio makes.

problems · trace18/18 pass
Compatibility checks for the Redfish rig in Inshore Flat
CheckThis buildAgainst
passspecies.waterInshore Flat: saltRedfish: salt / brackish
passrod.reel.seatspinning reelspinning rod
passmainline.species17 lb15–40 lb window (warns over 60)
passmainline.rod0.4 mm ≈ 16 lb monorod rated 8–20 lb (under 4.8 warns)
passrod.powerM rod, rated to 20 lb25 lb fish (warns over 35 lb, fails over 50 lb)
passreel.capacity~437 yd of 17 lb copolymer200 yd for a 25 lb fish
passreel.drag25 lb max drag10 lb floor
passhook.size4/02/0 to 6/0
passhook.strength70 lb before it opens30 lb (1.2 × 25 lb fish)
passsalt.corrosion3 metal parts checkedsalt water: salt-rated or stainless
passleader.abrasion20 lb fluoroabrasion 0.80: leader from 0.60
passleader.ratio20 lb on 17 lb0.75× to 2× mainline (12.75–34 lb)
passfloat.balance0.15 oz hanging0.105–0.3 oz lift window
passfloat.depthfish near 5 ftfixed float tops out at 6 ft
passfloat.reachfish near 5 ftfloat rigs work to 30 ft
passfloat.bottomdepth bias 0.85bottom feeder from 0.90
passcast.weight0.255 oz on the linerod rated 0.25–0.625 oz
passbait.hookcircle hookGulp! Shrimp rigs on jig / circle / j

Notes the engine attaches

  • Circle hook: do not set the hookhook

    Reel down until the line comes tight and let the rod load. A circle hook slides to the jaw hinge and rotates closed on its own. A conventional swing pulls it straight back out of the mouth: the technique change is mandatory, not stylistic. Read the guide.

  • No sun protection selectedapparel

    Inshore Flat runs up to 95°F and reflected UV off water roughly doubles your exposure. A UPF hoodie and polarized glasses are the two highest-value pieces of clothing in fishing, and the glasses also let you see structure.

Why these numbers

  • Inshore Flat runs 1–6 ft and Redfish feeds at a depth bias of 0.85 (0 is the surface, 1 is hard bottom), so the engine puts the fish near 5 ft. The bubble float sets depth on the line and tops out at 6 ft.
  • Current rates 0.35: enough to move a bait, not enough that the engine demands a bottom-holding sinker. 0.255 oz on the line, inside the rod's 0.25–0.625 oz rating.
  • The water is gin-clear and Redfish rates 0.55 for line shyness and 0.80 for abrasion. That is why the business end is 20 lb fluoro: it takes the teeth, gill plates and structure so the mainline does not.
  • Typical fish run 3–25 lb. That sets the 10 lb drag floor (this reel makes 25 lb) and the hook strength floor of 30 lb (this hook is rated 70 lb).
  • Inshore Flat is salt water. Every hook, reel, rod and swivel in the build is checked for a salt rating, and all of them pass.

Parts list

bill-of-materials7 lines
Every part in the Redfish rig for Inshore Flat with its chosen option and approximate price
StagePartOptionApprox.
hook.terminalEagle Claw Lazer Sharp Circle Sea4/0~$5
float.terminalPlastilite Water-Fill Casting Bubble–~$4
leader.connectionYo-Zuri HD Carbon Fluorocarbon Leader20 lb~$14
mainline.connectionStren Original Copolymer17 lb~$10
reel.platformPenn Battle IV Spinning Reel–~$130
rod.platformUgly Stik GX2 Spinning Rod–~$45
lure.platformBerkley Gulp! Shrimp–~$10
Street-price estimate, not a live price~$218
float.terminalbudget

Plastilite Water-Fill Casting Bubble

A clear float you part-fill with water for casting weight. Lets a spinning rod throw a weightless fly or an unweighted bait a genuinely long way.

~$4Purchase link unverified

No exact product destination has been verified for this item.

mainline.connectionvalue

Stren Original Copolymer

A blend that splits the difference: less stretch than straight mono, more manageable than fluoro, and cheap enough to respool often.

~$10Purchase link unverified

No exact product destination has been verified for this item.

reel.platformvalue

Penn Battle IV Spinning Reel

A full-metal, sealed-drag saltwater workhorse. Heavier than a freshwater reel because it is built to be dunked, sanded, and used again tomorrow.

~$130Amazon — Battle IV / size 5000

Verified destination: Battle IV / size 5000 (2026-10-20). Other sizes or packs are not verified by this link.

rod.platformbudget

Ugly Stik GX2 Spinning Rod

Effectively indestructible. A graphite-fiberglass blend that shrugs off car doors, tailgates, and everything a beginner will do to it.

~$45Amazon — GX2 6'6" Medium 2 pc

Verified destination: GX2 6'6" Medium 2 pc (2026-10-21). Other sizes or packs are not verified by this link.

lure.platformvalue

Berkley Gulp! Shrimp

Scent-soaked synthetic bait that genuinely works when live shrimp is unavailable. Reds, specks, and flounder eat it without hesitation.

~$10Amazon — 3 inch · New Penny

Verified destination: 3 inch · New Penny (2026-10-20). Other sizes or packs are not verified by this link.

Scope: the solver builds a tied hook-and-line rig from the parts in our catalog, cheapest first among builds with the fewest problems. Hard baits with their own trebles, flies, and field gear (waders, clothing, boats) are left to you. A different catalog would give a different answer, and the studio will check whatever you swap in.

Change one variable

Redfish, other water

Inshore Flat, other fish

frequently asked

05
What size hook for Redfish in Inshore Flat?

4/0, on a Eagle Claw Lazer Sharp Circle Sea (circle). The working window for Redfish is 2/0 to 6/0; the size is matched to the bait, so a bigger bait moves you toward 6/0.

What pound test line for Redfish?

17 lb copolymer in this build, inside the 15–40 lb working window. It measures 0.4 mm, the diameter of about 16 lb mono, and rod line ratings are printed for mono. This rod is rated 8–20 lb.

How much weight for Redfish in Inshore Flat?

None to hold bottom: this is a float rig, so the bait drifts at a set depth. the float lifts 0.3 oz and the engine wants at least 0.1 oz hanging under it so a bite pulls it down.

Do I need a leader for Redfish here?

Yes. Redfish rates 0.80 for abrasion and 0.55 for line shyness, with a leader window of 20–40 lb. This build uses 20 lb fluoro.

What does this Redfish setup cost?

About $218 for the 7 parts listed, using street-price estimates kept in our catalog. That is not a live Amazon price, and it covers the tackle only: bait, waders, clothing and boats are not included.